Sedan car SUV cross-country aloon cars: 2009

Saturday, September 12, 2009

Have Mercy Its Springtime in the Ozarks YEEEHAA!!!

Well it's not spring yet but the weather guys say it's gonna be in the 70s tomorrow. Well I can't stand it. We don't get many of these this time of year. Heck it didn't even reach 30 yesterday So I hearby declare January 8th a local holiday, here in the Ozarks, and the store will be closed, cause I'm goin for a putt. Any one care to join me? Even if only in spirit? Now this don't count for you guys like joquitar cause ya'll got the good weather rear round. but for those who live where there's four seasons you know what I mean. I'll wave if I see ya.

Orignal From: Have Mercy Its Springtime in the Ozarks YEEEHAA!!!

Harley loving kiddies, check this out...

My bro sent this to me and it's worth a look - Link

Orignal From: Harley loving kiddies, check this out...

ridgid 250 w/6'' stretch

O'kay I'm getting ready to do a custom and I'm leaning towards a ridged with a 250 and a 6" stretch 0" up can anyone tell me how this rides gonna be. Will I be able to do 200 miles without the crowbar to get me off?

Orignal From: ridgid 250 w/6'' stretch

new england motorcycle show

Even though we have about 5 feet of snow here in NH, it is never too early to think about spring and riding again, right? Hubby and I just returned from the New England Motorcycle Show

Orignal From: new england motorcycle show

Sell the old folks on ebay?

Now this is an interesting approach to procure the funds for that new Ultra. Ah, mom, can you come over and pose by my Sporty? See Item No: 2400299382

Orignal From: Sell the old folks on ebay?

Importing Motorcycle

Have any of you imported a motorcycle from Canada to The US? I know someone that is interested in having me try to sell a newer (95-98) model XL on ebay. Is it very difficult to do? My preference would be to have the buyer complete the arrangements as much as possible. What is required of the seller? Thanks folks, you are always such a big help.

Orignal From: Importing Motorcycle

A Really Nice Blast From The Past ! !

Every once in a while a real nice restoration is offered on ebay. Well here is one that is worth a look. Check out item # Link I do not know the seller, the listing came up in a saved search. Just thought I'd post it here on the Blvd so all here could get a glimsp of a rare restoration.

Orignal From: A Really Nice Blast From The Past ! !

Harley Announces Bike Week Schedule !

Link Lots of good stuff at Rider magazines site, LinkStrangers on Steel Horses

Orignal From: Harley Announces Bike Week Schedule !

eBay's malfunction is gonna cost me $$$

Yep, good 'ol eBay crashes and I had several auctions ending in 30 minutes. What now? Shouldn't I get my money back for a service that didn't perform as advertised?

Orignal From: eBay's malfunction is gonna cost me $$$

Thinking about buying American Ironhorse Tejas

I'm thinking about buying an American Ironhorse Tejas. Anybody out there know much about these bikes? I've heard lots of good (from the dealers). But I haven't heard any feed back from owners. Any AIH owners or friends of owners please fill me in. Any 2001's out there for sale?

Orignal From: Thinking about buying American Ironhorse Tejas

Can't identify fitment. Can anyone help?

Hello all. I am interested in an auction currently on. I have contacted the seller to try and find out what years/models this kit fits, but they are not sure. The part number for the kit is 53574-93. It's a complete lock kit for Harley FLs. Does anyone know what all years this kit will fit? Thanks in advance. Here's the auction number: 1876299758.

Orignal From: Can't identify fitment. Can anyone help?

Photograph of Harley engine w/ woman's foot.

A couple years ago there was a guy listing a closeup photograph print of a a Harley engine with a woman's foot on the aircleaner cover. The photograph was in black and white all except for the woman's toenails which were in red. If anyone knows the whereabouts of the the owner that was listing the prints would you please let me know how I can contact him. Thanks. John

Orignal From: Photograph of Harley engine w/ woman's foot.

Snowstorm in the northeast. Haven't seen a motorcycle all day!

And I probably won't see a motorcycle on the roads for awhile. The snow is dumping pretty good out there. Supposed to continue for today and into tomorrow. Days like this I wish I had a trike. So, who's going for a ride today? Go ahead, tell me, I can take it..........

Orignal From: Snowstorm in the northeast. Haven't seen a motorcycle all day!

Should I be worried?

OK, I worry enough already about the little things! Then I come across this and really start to worry! Link My bike, 2000 FXDX - Twin Cam 88 is on the list. How would I know if my bearings are going out? I have to leave right now for the rest of the night, but I'll check in tomorrow and see if anyone knows anything more about this?

Orignal From: Should I be worried?

Beware!! If it sounds to good to be true, it probably is!!

I usually do not do this kind of thing but this has me concerned. As an independent motorcycle dealer who lists a number of bikes on Ebay and sells bikes elsewhere via the internet I had to make this comment. I have noticed over the last few months several bikes where the seller has a ridiculous price, like a pristine 98 Fatboy for $8000 USD, a 2003 V-Rod for $12500 and there have been others, they all ask for deposit money wired to an account, sometimes to another country, with the remainder due after delivery. All I am asking is that you beware of who you are dealing with, ask questions, get information, spend the extra $65 to have the bike checked by a local shop, if they do not agree, that is the first red flag. I can not count the number of winning bidders who have not even emailed me before hand, fortunately they are dealing with a person who is straight up and not trying to scam. Just beware if it is to good to be true, it probably is. Thanks for listening and BEWARE!!!

Orignal From: Beware!! If it sounds to good to be true, it probably is!!

Jupiter's Travels revisited...

Any of you my age or so probably remember the story of Ted Simon, who traveled around the world on a Triumph, and wrote a book called Jupiter's Travels. Well, he's at it again. This time, in his 70's, on a Beemer. LinkStrangers on Steel Horses

Orignal From: Jupiter's Travels revisited...

why isn't there a motorcycle chat room?

are we not important enough to have a chat room like so many others have?

Orignal From: why isn't there a motorcycle chat room?

Any Honda CB Chopper Riders Out There!!!!!

Just looking for other people out there who ride Honda cb chopper. To ask about there ideas maybe pass some pic. i myself have a 74 cb 550 chopper.. WHAT DO YOU HAVE??

Orignal From: Any Honda CB Chopper Riders Out There!!!!!

Big Dog / V 8 Question??

With the size of the bike and engine I wonder why we don't see more of these in 3 wheel configs? Seems a natural. Don't let blind ambition erase your intuition!

Orignal From: Big Dog / V 8 Question??

Your Word is Your Bond - or what?

I was buying a bike from accjpl(149). He has good Feedback. I have a job, work long days, and cannot hang on ebay, and I wanted the bike. I asked him for a "Buy Now" price, he agreed, and I responded and agreed. Then, two other bidders started to escalate the bidding. This seller ignored me, and eventually gained $22.89 above my bid of two previous days. My question is: Does any biker out there still believe that once you give your word, that you are good to go? Or, just wait for a better bid?

Orignal From: Your Word is Your Bond - or what?

What would you do??

Hey all, just trying to get some ideas from some here on the BLVD. I purchased an item #1872472830 (a reserve auction, buyer to pay actual shipping charges...) from a seller on eBay(auction ended Nov 18). When the auction ended, I sent out an e-mail from myself to the seller. I was real cordial, stated that I'd won the auction, asked for a total on where I wanted the item shipped to. The seller didn't respond for a couple of days, and only after I sent another e-mail thru a current auction that he had listed. When I finally got the total from him, I got a money order, sent it out to him, then e-mailed him and asked for him to contact me when the m.o. arrived. A holiday was in the middle of when I sent out the money order and my next e-mail from the seller. I got an e-mail from him asking if I sent out the m.o., and if I was going to....(Nov.29)(I'm starting to get a bit worried about this seller now). I restated the m.o. was on its way, and that I wanted the seat! He finally said that he recieved the money order and would have to box the seat and send it out,(Feedback left for me around this time). Now this is about 2 1/2 weeks after the end of the auction(Dec 4). I sent an e-mail on Dec 13 asking if the seat has been shipped and how(UPS,USPS). As of early Dec 14, it still wasn't shipped! Finally, Dec 15 it got shipped thru USPS. The seat arrived on Christmas Eve Day, almost five weeks after auction closed. The shipping price that I was charged was $32.50 and what was on the shipping box was $10.12! I e-mailed the seller on Dec 25, asked him about this, to no response, I'm beginning to feel like I am being ignored. I re-sent the last e-mail on Dec 29, and was real cordial, and got a response from him stating the price he quoted me was thru UPS, but he decided to ship thru USPS, he then went on to state that I got a good deal on the seat, and that he paid more for it when he bought it. Dec 29, he stated that he'd refund $15 of my shipping price, the rest, he says is for boxing and handling charges. I as of Jan 19 have not recieved a check from this seller as stated by him....I have not left feedback for this seller ..... I am leaving him plenty of chances to rectify this situation, and he is basically telling me, too bad so sad! What would you do??

Orignal From: What would you do??

gl1100 goldwing rear brake caliper

Does anyone have a rear brake caliper for a 1982 gl1100 goldwing interstate? I use to see them all the time up for auction. Now I can't find one to save my life and the local honda shop says they don't make them anymore! Help!

Orignal From: gl1100 goldwing rear brake caliper

IS THIS A SCAM

I have had a bike for sale in another web site and last week had 2 requests for pictures which I sent. Yesterday while looking at EBAY I saw my bike in ad #2401870488 being sold by somebody in Indonesia. If you look closely he is actually showing 2 different bikes.

Orignal From: IS THIS A SCAM

EVEL DIED

I'm crushed. I loved him so much. God rest his soul and bless his family.

Orignal From: EVEL DIED

Shipping custom bikes: DAS went from 900 to $1420, who do YOU recommend?

Happy Holidays, Guys (and Gals) I picked up a nice custom 9.5 ft drop seat in Miami and need to get it to central Minnesota. DAS quoted me $900 and it ended up at $1420, I am positive someone out there knows a professional company that has ethics and can get it here for $300 less...key word here: PROFESSIONAL. Any suggestions or references or links you can share with me that you have had good experiences with will be sincerely appreciated. thanks from snowy Minnesota...its falling right now as I type! Happy Holidays!

Orignal From: Shipping custom bikes: DAS went from 900 to $1420, who do YOU recommend?

Help with oil leak

Guys and Gals my son and I ride dirt bikes he rides a Honda CR80 that just shoots oil out the back end of the pipe. he is running an FMF SST from the bike, the middle seal is not leaking however everytime we go riding we come home and his frame just below the spark arrestor an FMF turbine core II is covered any ideas, Honda says, well bring it in we'll take a look at it. Yeah sure. He is a great mechanic for 13 years old however there is some knowledge you need to acquire over time. He did suggest going from 40 to 1 on the premix to 36 to 1 thanks for any help Cindy

Orignal From: Help with oil leak

Vintage Bikes

Looking for some sort of "Blue Book" or "site" that I can access for vintage bikes - Any hints?

Orignal From: Vintage Bikes

Recommended Moto Books For Xmas Gifts

Hi, requesting recommendations for good exploration and adventure moto reading and/or any specific moto books everyone should own. Thanks for your help.

Orignal From: Recommended Moto Books For Xmas Gifts

how to lower a 79 cb750

i got a 1979 honda cb750, dohc, how can i lower the bike in front and rear without major speendings ?????

Orignal From: how to lower a 79 cb750

what's up with trhat?

I see a ton of bikes on ebay with either a - buy it now - price or a reserve price that is higher or just as high as if I went a purchased the bike at the dealer. In most cases I will also need to pay shipping unless I find a bike locally. Do these folks listing these bikes bother to do their home work before listing? And I have been watching bikes on ebay for some time now, and I have notiiced that most of these auctions end with no buyer. It would be nice if these sellers would read this post!

Orignal From: what's up with trhat?

MONTESA CAPPRA 414 79-80

NEED HELP PLEASE LOOKING FOR SPARES LIKE EXHAUST PISTON /BARREL/ AND HEAD CAN SOMEONE PLEASE HELP.IAN

Orignal From: MONTESA CAPPRA 414 79-80

More on Space Shuttle tragedy--NASA needs our help!!

From MCN: NASA is recognizing the unique mobility and perspective of "off road riders" of ATV and cycles, who may be in a position to help find pieces of wreckage of Columbia, especially in the western areas of the debris field. The known debris field can be seen at NASA's web site. Never thought I'd see the day that the government was in favor of cyclists/off roaders. Too bad that it takes a tragedy for that to happen. They stress that there request for help does not justify tresspassing or riding illegally.Strangers on Steel Horses

Orignal From: More on Space Shuttle tragedy--NASA needs our help!!

Is there anything special about this Harley Davidson Leather Jacket?

Hi! I am listing a Harley Leather jacket soon and have a couple questions. I want to know if this is any special edition or anything, also it is VERY heavy and wanted to know if there is a way to tell if it's horsehide? I have included pictures of the jacket front and back, tag and close-up below. Please let me know what you might know about it. Thanks so much! ******************************************************* Can you find the camera hog in this picture? ******************************************************* Can you find the camera hog in this picture?

Orignal From: Is there anything special about this Harley Davidson Leather Jacket?

Fees for auctions

I listed my Quad with a reserve price that was met. Ebay is charging me $80 for the final bill. Does that sound right?

Orignal From: Fees for auctions

Laughlin River Run

Ok. You can't believe everything that gets e-mailed to you but you can't discount it in its entirety, either. Excerpts from several e-mails I received follow, and while I believe they were intended to be inflammatory, I also think that any rider considering the River Run should know that it could be more hassle than fun. ********************************************** ..."...alerted the lobbyist that a stakeholders meeting was being held on March 25, 2003, with Laughlin's Chamber of Commerce and the DPS regarding the up coming River Run. "Lt. S. stated "We want to send a very clear and convincing message that the patch wearers are not welcome in Laughlin." NO COLORS means ANY and ALL patches i.e., CMA, HOG, (any insignia on leather). Club T-shirts are iffy and up to the individual casino if they will be allowed. "The Laughlin Sheriff recommended that the hotels ban colors and if colors are worn they will be confiscated and not returned. All casinos and hotels with the exception of the Riverside will be enforcing the NO COLOR policy in one form or another. The vendor's area will not allow colors, nor will the bars. "Colors are only allowed in hotels rooms and on the street. It was made clear that police are there to protect the business owners, their customers and the police themselves. "Lt. S. went down his list of police presence that will be visible during the run. 20 motor cops, swat teams, helicopters, dogs, 40 California Highway Patrol, 150 DPS, special ops, 200 intelligence cops from around the world who track motorcycle gangs and several jail buses. "Lt. S. described his entire plan to be geared toward "prevention" and went down his list of police presence that will be visible during the run. He plans to have everything from motor cops, to swat teams, to helicopters, canine units, California Highway Patrol, officers from Las Vegas Police,150 DPS, special ops, 200 intelligence cops from around the world who track motorcycle gangs and several jail buses on hand and ready to go. Each hotel and casino will have its own assigned unit, which will include officers in the casino surveillance. "... Lt. S. went on to say that if any person that was part or associated with the incident in 2002 shows their face in Laughlin they will be hunted down and hit swift and precise. The jail buses will be standing by to shuttle detainees to the Las Vegas jail. Snidley's motto was have an attitude you'll go to jail. Snidley said that specific targeted groups would not be allowed to ride in mass in Laughlin. "Laughlin generates $20 Million during this weekend. They want our money but they don't want us. They feel that this is Laughlin's Run, not the motorcycle communities run. " Attending the meeting was Lt. S., Laughlin DPS, , members of ABATE, a CMA, Star Rider, Route 66, vendors and shop keeper. ABATE were the only ones present who were concerned about our rights. The others were glad to hear that the police would have such a forceful presence creating a feel safe environment. ******************************

Orignal From: Laughlin River Run

New lift out

I just got this new lift for christmas and thought I'd share it with ya'll. It's called an Link and it takes both wheels off the ground so you can wash your wheels without having to push your cycle around. Check it out and post on the thread to let me know what ya think! Whoever thinks this kind've stuff up anyway?

Orignal From: New lift out

Hope you're feeling better, HarelyLife4Me.....

...now, please pass the cough syrup!

Orignal From: Hope you're feeling better, HarelyLife4Me.....

Engine for 1984 HD Sportster

My son badly needs a replacement 1000 cc engine for his 1984 HD Sportster. His engine has a lot of internal problems and is not suitable for rebuild. Any suggestions as to where we might find a replacement engine, or what else we might be able to do with the bike?? Any help would be appreciated.

Orignal From: Engine for 1984 HD Sportster

OT hilarious must read thread over at ebay motors board

There is a foreign female scammer trying to pass for legite and her typing skills are atrocious so all the wiseguys on the site are having a field day with her. It's a riot. Go to the thread titled " happy new year 2008 2 re1 newbie here 101 can ne1 guide me on". This one will probably be a classic

Orignal From: OT hilarious must read thread over at ebay motors board

Saber / Magna discussion board

I was participating in a Saber / Magna discussion board, it was very active, lots of good info. After some time away went to log on and it was gone. Anyone know what happened or where a similar board can be found? Thanks, Randy

Orignal From: Saber / Magna discussion board

Why so many fake Goldwing / Trike ads?

Ok, I'm new at this, just started. I've been looking for a 2000-2006 Goldwing, maybe to convert to a trike. I have a good idea how much it all costs and worth. I'm wearing out my fingers reporting bogus ads to Ebay. You don't list a buy me now price of $5000 on a trike that is worth $30,000 and take a 25,000 loss. I've seen a trike sell in Jacksonville for $28,700 and show up listed again in MD, TX and this week in CA...the same photo's and words in the ad as Jacksonville. Right now there are 5 bogus ads in a row under Goldwings. You don't sell a 2006 bike for $4000 and not even list the location. It doesn't pass the smell test....This makes it very hard to find or trust anyone. Doesn't Ebay look at these and check for obvious fakes ?

Orignal From: Why so many fake Goldwing / Trike ads?

57 PanHead Engine

How Collectable would a 57 PanHead Engine be ?

Orignal From: 57 PanHead Engine

2007 Suzuki Boulevard C50 Need Fender

Hi all, I took my bike out for a ride today and found that somehow I chipped the Rear Fender, it is a Red/Black 2007 Suzuki Boulevard C50. Anyone have one for sale or know a reasonable place to purchase one? This is my first bike and I do not want to ride it chipped. Also, are they hard to replace? Thanks

Orignal From: 2007 Suzuki Boulevard C50 Need Fender

Ever hear of a 0 1 2 7 5 5 blue ?

From out of the blue, you guys have got a new poster to flame! Have at it! Welcome to the Blvd, Blue. Here's a song for you.... Link

Orignal From: Ever hear of a 0 1 2 7 5 5 blue ?

Hello all, I list my auction

Orignal From:

Monday, September 7, 2009

School Controversy

Wednesday, September 2, 2009

Question aboutKawasaki ZX600

I sold a front wheel for a 2000 model Kawasaki ZX600. Buyer wants to return it because it doesn't fit her 2000 ZX600. That's what the shop told her.Does anyone know how many different front wheels were made for a 2000 ZX600? I will refund her money if the wheel checks out but something isn't right about this. May be buyer remorse or she found a cheaper wheel.Any help would be appreciated.Billbillphil. I sell parts

Orignal From: Question aboutKawasaki ZX600

infos needed, i wanna sell motorcycles

hello everyones...i;m from MONTREAL, CANADA...im a motorcyclist, did superbike races....a real fanatic.. tell me, i wanna sell motorcycles to US customers...once sold i receive the payment, ( paypal ) then i have to ship the bike, what about custom fees, if any, the customer pay the dutyes....it;s where im confused...let me know,BRUNO

Orignal From: infos needed, i wanna sell motorcycles

Old Suzuki S10. Any info on it?

Hello, I was given an old suzuki S10. It looks to be from the 1960's. does anyone have any info on it or where i could get some and is it worth fixing up. any help would be appreciated. Thanks so much for your time.

Orignal From: Old Suzuki S10. Any info on it?

Low BIN prices, and eBay's liability

I'm currently looking to purchase a Suzuki GSX-R 600. Now, when I click on Motorcycles>Suzuki>GSX-R I see ton's of listings... Naturally the cheap ones that look really nice catch my attention. Now here's the thing. I see a bunch that have "buy it now prices" of like $2900 for 2005 model bikes with really low miles. Personally, I stick to the "If its too good to be true... it is" ideology, because this simply isn't possible. No one in their right mind would ever undervalue such beautiful machines. Now my question is... how could eBay allow for such outright scamming and/or flooding of the sportbike sections with such fraudulent ads? Now I know anyone with a (0) by their name, is untrustworthy, but some of these people have some positive feedback. I understand that eBay protects me on any vehicle purchased online below $10,000 which basically covers all of these machines... but now I'm just worried about being scammed. Does anyone have any suggestions or possibly some tips on finding the right bike on eBay without getting screwed? Thanks a bunch everyone. Chris

Orignal From: Low BIN prices, and eBay's liability

Mountain; Dodo, Gearhead to max we need you

The people at Ned's are asking that you please stop by and chat with us ...109x you can come on probation. Please come y'all. Any and all are welcome for bike related adventures.

Orignal From: Mountain; Dodo, Gearhead to max we need you

How to Drain Carbs on my Yamaha Seca II XJ600

Hi. I have a 1992 Yamaha Seca II XJ600, I got water in the tank and the engine cuts out when I turn the throttle. Instead of having it towed, the tow guy recommended draining the carbs. Anyone know how to do this? I was looking on google but no specifics. Do you fill the tank before draining? Thanks.

Orignal From: How to Drain Carbs on my Yamaha Seca II XJ600

International Shipping for Motorcycle Engines....HELP

I have had several people looking at the engine(s) I have listed on Ebay. The problem is that most of them are from over seas. Is there a great place to go that will quote me some sort of fee for international shipping for the engine only? Any help would be appreciated. Ride Safe.

Orignal From: International Shipping for Motorcycle Engines....HELP

Harley's York workers go on strike

Harley's York workers go on strike February 2, 2007 - BizTimes Daily More than 2,700 union machinists went on strike at Harley-Davidson Inc.'s manufacturing plant in York, Pa., this morning. The members of the International Association of Machinists and Aerospace Workers (IAM) voted Wednesday to authorize a strike after rejecting the company's contract offer, which would have reduced pay for new hires, required employees to pay part of their health insurance premiums and forced concessions in pensions. In anticipation of the strike, Milwaukee-based Harley shut down production at its York plant, which is the company's largest. York workers said the company's contract proposal was a "betrayal" to the workforce. "Harley-Davidson has no business behaving like they're on the brink of bankruptcy," said Tom Buffenbarger, international president of the IAM. "When Harley was flat on its back in the 1980's, it was union members who refused to let it die. Harley went on to become an international success story but they've obviously forgotten how they got this far

Orignal From: Harley's York workers go on strike

2003 ZR1000 gas tank

Looking to purchase a used gas tank for this Motorcycle

Orignal From: 2003 ZR1000 gas tank

Buell Riders

Where are the few who ride buells?

Orignal From: Buell Riders

new factory parts

Anyone know who might have the cheapest prices on factory accessories on the web? I have seen a $210.00 difference on the same item ! TEXAS is a very competitive state but that is a blow out.

Orignal From: new factory parts

What's the life of the 1995 Virago 1100 motor??

I'm a fairly new rider and started with the Virago 535, but ready to move up. Looking at a 1995 1100 ... it's in beautiful shape, but it has 72,000 kms on it. Any experience, comments, thoughts on the 95 Virago 1100 motor with this many kms ?? Does it still have lot left, or should I stay away from it ??

Orignal From: What's the life of the 1995 Virago 1100 motor??

Suzuki Trailhopper

Restoration Help wanted! Any Suzuki Trailhopper 197X owners out there?

Orignal From: Suzuki Trailhopper

400CC sport bikes

Anybody had experience on the 400CC sport bikes? They are imports here, but they can be had. I'm interested becaasue in the 400cc size and under, insurance is cheap. (And gas mileage is great!) BUT, I don't want to ride a 400cc puddle-jumper like a CB400 or a GS400 or something. I've seen the Honda VFR400

Orignal From: 400CC sport bikes

Anyone going to Bike Week?

I'm going to see if the old Shovel will make it one more time. Probably going to try some hang gliding while I'm there this year.

Orignal From: Anyone going to Bike Week?

will not run

My 1987 Aspencade had a stator and rectifier replaced. Now it seems to have a starter out. The Honda shop has had it for a couple of months now and can not figure out why every time i get it home it will not start, when you hit the starter button it just acts like the battery is bad. It has had 3 batteries. Any ideas. After you let it sit all night it will turn over but get no fire.

Orignal From: will not run

2008 Model Year Update

The item specifics for Cars and Motorcycles will be updated on Thursday. In particular, the "year" attribute will be updated to include the 2008 model year. We apologize for the delay in making this change and hope it hasn't caused too much inconvenience. Pancho eBay Motors

Orignal From: 2008 Model Year Update

virago 750 backfire

recently purchased 1983 virago 750. typical starter problem. The problem that concerns me is the backfiring on the front cylinder. The boot is ok and the carbs are newly rebuilt. I took the carb apart just to make sure it was clean and it is. Is there a typical problem with these or do I just need to check the valves and cam and all the normal stuff. Any advise on the starter would be appreciated too! thanks Jim

Orignal From: virago 750 backfire

Shipping motorcycles- a better deal

I got a quote off an Ebay link for shipping a bike I recently purchased...around $1000.00- $1200.00 I contacted another company and got it shipped for 1/2 of that! Keyboardtech.com

Orignal From: Shipping motorcycles- a better deal

Registering Chinese motorcycles for road use

I'm considering picking up one of these cheap chinese dual sports or street bikes but I'm concerned with registering one for road use. Most only come with "paperwork" and not actual titles. Anyone have any experience here?

Orignal From: Registering Chinese motorcycles for road use

Does anyone have Victory 2000 Sports Cruiser Parts?

Plzzzzzz help my dad is trying to put one togethor that my uncle destroyed, and he needs the transmission and the engine. Thanks sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much if you can help! If not thanks for looking!

Orignal From: Does anyone have Victory 2000 Sports Cruiser Parts?

Twin Cam cam bearing removal, OK Gear Heads, How do you

How do you remove the inner bearings on a twin cam without the use of HD special tools? And any other tricks required to remove and replace TwinCam cams... Thanks from your average shade tree mechanic.

Orignal From: Twin Cam cam bearing removal, OK Gear Heads, How do you

No VIN frame?

I just recently (today) won an auction for a CBR 900rr frame. The listing said "no paperwork" so I sent a question about it to the seller. I asked if there was any reason (lein, stolen) I couldn't petition the state (Ohio) for a title. Only response I got was "no numbers". First thought was red flag but then I remembered that Hondas put the VIN on a sticker and it was removed when the frame was polished. I bid on it and won. Figured $50 was worth the trouble to get a title. Since I told the guy I'll pick it up in person, I haven't heard back yet. Sound fishy to you folks? He's got 100% feedback. I think I'm going to give him a day to contact me and then I'm moving on to another one. Thoughts?

Orignal From: No VIN frame?

1979 Harley

This is a serialized (69-8) belt buckle which has harley davidson markings on the front. It has a "BH" engraved on it and is either silver or puter. I cannot find it anywhere on the web. Any ideas to where I could find a value on it? thanks!

Orignal From: 1979 Harley

NEW STREET LEGENDZ MOTORCYCLE CLUB ***

BALTIMORE'S FINEST MOTORCYCLE CLUB....CHECK IT OUT Link

Orignal From: **NEW** STREET LEGENDZ MOTORCYCLE CLUB ***

Bonneville News

Local guy from here set a record in 250 cc class. Bumped the 110 mph record to 128, recorded 128 and 129 on the runs. LAND SPEED MOTORCYCLE RECORD SMASHED..TWICE!!! Ack Attack a dual Busa based streamliner bumped the old Easyrider record up to 342 or 344. The Easyrider record held for 16 years!! Later that day another streamliner piloted by I believe Chris Carr broke the new record a few hours later, still in the 340 range..

Orignal From: Bonneville News

what forks fot vtr 1000?

My nimrod nephew has a 04 vtr 1000 which he let a friend ride into the side of a parked car.Insurance wont pay because friend had no cycle license.We are trying to repair bike cheaply,forks are waxed.anybody know if another model forks will work in existing trees without wheel or brake replacement? Been trying to find original forks but they are hard to find.Everybody wipes out front end.

Orignal From: what forks fot vtr 1000?

Virago gearing

Does anyone know if I can change the final drive unit on this 1991 Yamaha Virago 1100 with some other Yamaha, maybe a venture, to get a little higher gear ratio? This bike is just geared too low for comfortable interstate cruising with stock unit. I would like to be able to drop rpm's by about 500 at 70mph. I've already counted teeth on a v-max, it is geared a bit lower...won't help me. I've checked with a couple of salvage yards, seems like nobody knows much about ring and pinions for Yamaha gearing. I would appreciate some help, thoughts, maybe even an opinion...thanks anybody.

Orignal From: Virago gearing

Off topic tech question

I have a question for anyone who cares to answer. I guess this could also apply to motorcycles. My '81 ski-doo Everest 500E fan cooled twin fouls the fan side plug frequently. I tried a hotter plug and switched from NGK to Champion with the same result. I was using a B7 resistor plug and went to a B8. The Champ was the equivelant of the B8ES. The engine has a points type ignition. After fouling, I can insert a new plug and everything's fine. That's why I think it isn't the coil or the rest of the ignition system. Although, I could be wrong. The engine has 120 psi on the fan side and 128 on the other.Single carb, so It shouldn't be a carb problem. Again, I could be wrong. Any suggestions? Thanks, Gomer

Orignal From: Off topic tech question

Lots of bikes neat pic

Hi folks. This is my first visit ever to this forum. I went to a persons place out of town to look at and purchase the 51 Bel Air hardtop. He said it was in the road! I knew he had some bikes and parts but never expected this.

Orignal From: Lots of bikes neat pic

Cool Free Programs I Have Found

I found this Tron game the other day while looking for something totally different and I just could not resist.. This is a pretty neat game especially for free.. For windows download scroll down to win32 click it and it will take you to the download page for windows... Link Turn off your pop up blocker but anti virus is ok left on... This is totally safe with no ad ware or crud...and it should be ebay allowable as it's non commercial..

Orignal From: Cool Free Programs I Have Found

When AMF bought Harley..

I was 18 years old and worked in the York PA facility.. We made lawnmowers, snowmobiles, bombs and munitions for VietNam. and then motorcycles....no wonder they leaked.... It was fun though...25 bucks in the credit union got you 3000 bucks of credit at 2%...every young guy had a Harley and a Muscle car.. ( I had a 396 Camaro and a leaky Sportster) Cletus.

Orignal From: When AMF bought Harley..

Are these items

180093182087, 180093326374, 180093326506, 180093326733 I was not aware that "genuine Harley-Davidson Service Manuals" were ever released on CD's in PDF format.

Orignal From: Are these items

Ghost Rider Nicholas Cage

I saw the movie Ghost Rider last weekend, wasn't bad, entertaining. The motor cycle Nicholas Cage (The Ghost Rider) rides is about a 90% replica of the original captain america bike in Easy Rider 1969. The paint was the only noticable change. I thought it was a cool tribute to pay to the original Captain America Bike. TimeLess. A flameing skelton in leather on a big chopper was pretty cool too.

Orignal From: Ghost Rider Nicholas Cage

punch yer lights out...

comin' to get ya! and you know who you are you discussion board freak(s)!

Orignal From: punch yer lights out...

Rear rotor(Honda CB900 Custom)

The rear rotor on my CB900 rubs against the caliper bracket.Warped? Help.

Orignal From: Rear rotor(Honda CB900 Custom)

Bought a Honda CBR1000RR on eBay, undisclosed problems...

I really don't appreciate dishonest sellers. Bike is basically OK, but several obvious undisclosed problems, cost about $200 to fix. There is no question they were intentionally omitted. There were plenty of pics on the auction, all carefully omitting the problems. This was from a used car Dealer in Alabama. Seller won't return my calls, won't leave feedback until I do. Any suggestions?

Orignal From: Bought a Honda CBR1000RR on eBay, undisclosed problems...

yamaha final drive ratio

I'm still searching for answers. Does anyone have ratio numbers for yamaha final drive units? I would really like to gear this 1100 Virago just a bit higher for a more comfortable cruise. I know that some units don't have a threaded hole for the shock...not a problem..I'm a machinists. Does the unit on a venture have the same ratio as a virago? I counted the teeth on an old one from a salvage yard that was "supposed" to be a venture, it was geared lower. Maybe I was handed something else, might have been an Edsel or a Studeabaker. I would surely appreciate a little help, thanks...hillclimber

Orignal From: yamaha final drive ratio

Daytona Trailer Week 2007

Thursday 03/01/07- Replaced rear tire on the bike, changed the oil, and replaced the sidecar windshield. Bike looked pretty nasty (green slime, dirt,etc.) so I got out the power washer and hit it good. Friday 03/02/07- Left the house at about 7:00am. Kinda cool out (high 40's/low 50's) so I dressed warm. Totally uneventful ride to Panama City, FL, where I spent the night at a friends house. Saturday 03/03/07- Left P.C. around 7:00am. Cool again so I dressed warm again. Stopped in Talahassee and visited with a friend. Headed out around noon. Bike was running pretty good, just weeping a little oil around the gaskets. Got to Ocala around 4:00pm. There were races at Volusia this evening but the weather looked like rain towards Daytona. I didn't know if I wanted to chance riding over there just to have the races cancelled and then have to ride down to Davenport at night. I decided to head down to Wallaby Ranch in Davenport, where my brothers live. It started raining at Wildwood and it rained until I arrived at Wallaby Ranch about dark. They were having a birthday party for one of the ranch employees and I arrived just in time to get a medium-rare steak hot off the grill, with all the fixins', including some pretty decent wine. Went to my brothers trailer after dinner, unloaded the bike, and caught up on what's been happening with them. They've both become hangliding bums! They both live at Wallaby, one in a tent on a platform, and the other in a camper trailer. They help around the place to defray the cost of their hangliding. Sunday 03/04/07- Got up at 7:00am and went hangliding. WHAT A RUSH!!!!!!!!! Around 10:00am my youngest brother and I headed out to Volusia Speedway for some flat track racing. The races Saturday HAD been cancelled due to rain and it was taking them longer to get the track prepped than they planned on. Racing started around 4:00pm, feature race finished at around 9:30. Temps had dropped into the low 40's, one of the guys from the ranch had a condo at Flagler Beach and told my brother he could use it anytime he wanted to, soooooooooo, we spent the night there instead of riding 80mi. back to Wallaby. Monday 03/05/07- Headed to the Speedway around 8:00am. Stopped at the Jam-On swap meet to get a mirror (mine fell off just South of Perry on the way down). Swap meet was smaller than in previous years. Spent the day watching the vintage races at the Speedway. Springsteen won the Formula 750 race by over 1/2mi. on an XR-750. That sucker sounded really sweet at speed. Headed back to Wallaby around 5:00.pm.

Orignal From: Daytona Trailer Week 2007

Deuce taillight prob

Just got through painting the tins and repairing an `02 Deuce. I got a prob with the taillight. I bought a pack of 2 GE 1157s. When I turn on the taillight it will burn for just a few seconds then burn out. It discolors the inside of the bulb glass almost like it was getting too many volts. My first thought was I had a pinched wire or short. If that was so, it should be blowing circuits....right? Any ideas would be appreciated. It`s the little/simple stuff that will drive you up a wall.

Orignal From: Deuce taillight prob

Help on best way to sell a T-shirt collection

My friend asked me to sell her deceased husband's huge collection of Harley t-shirts on EBay. My problem is what is the best way to approach this. There are 500-600 shirts from cities all over the world, all new, no 2 alike. Should I list it as one collection or should I break the collection up? If I break it up, how? I know absolutely nothing about Harley collectors' interests. I welcome your input!

Orignal From: Help on best way to sell a T-shirt collection

Am I goin crazy or did they change Ebaymotors?

If it ain't broke don't fix it. What did they do!!! My head hurts

Orignal From: Am I goin crazy or did they change Ebaymotors?

Planning to repair your car/lite truck ?

Fix it for free, just join our network, also free, and follow directions no cost. leave your contact information. Link

Orignal From: Planning to repair your car/lite truck ?

Harley lighting question

I'm looking for the Harley Davidson riders in here to post up some opinions/feedback on my ebay store. You guys are the best source of info regarding how the store should look. Take a peek at my store if you could and let me know what you think

Orignal From: Harley lighting question

Monday, August 24, 2009

Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

Can someone please help me identify this helmet. Shorty is on the side with Duns on the tag, the inside part of visor has a patent USA number. Is this considered a vintage helmet and if so is it worth posting. Thankyou

Orignal From: Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

How can I find a parts catelog for 2005Harley Davisdon Bike: Problem my son gave me all these stock parts from his Bike and I do not know anything about them except what he told me

Orignal From: NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

BIKERS vsMOTORCYCLISTS

whats the difference between a motorcyclist and a biker?besides the obvious that one eats cheerios and the other oatmeal for breakfast????????

Orignal From: BIKERS vsMOTORCYCLISTS

HELMET LAWS

how many bikers(and motorcyclists) out there are in favor of manditory helmet laws?how many are opposed?does anyone know any other country in the world where it is legal to ride without a helmet????

Orignal From: HELMET LAWS

Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Hello . . . .

Orignal From: Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Rare Indian!!

I have a rare indian motorcycle where should i sell it??? HELP

Orignal From: Rare Indian!!

Need Help Please

I have A VW trike with A Honda front end. My front blinkers got broke off and I need to get some more but I dont know What Kind of Honda front end is on it. Any ideas? The blinkers are the kind that screw into the headlight. Any help appreciated.

Orignal From: Need Help Please

Spark Knock and Bad Fuel availability!!

I know this subject is targeted more for the riders of older bikes, as I'm well aware that newer bikes with EFI may have anti-knock sensors that eliminate or reduce the problem. However, I also know that my friend's '03 Road King has EFI, and he is now developing a Spark Knock problem....so perhaps the intended audience will be expanded over the summer. I have 2 HDs...both very similar, but one is virtually free of any spark knock and the other is plagued with it. Both are TC88 motors bored out to 95 CID, and both are carburated. Both have the Screamin' Eagle Ignition Module, both have 2-into-1 exhausts, and both are 'cam'd'. One is an "A" motor on my '00 Dyna (which has NO spark knock) and the other is a "B" motor on my '01 Fatboy. Needless to say, they both get the same gas from the same pump. So, why does one bike perform so differently from the other? Let me just say that I've had this 'discussion' with countless Harley experts, and the opinions are as diverse as the individuals themselves. But...before getting into the 'bike' issue.....let me mention fuel itself. This is a problem that's been around for years, and in some areas it's not getting any better. We're now being faced with all kinds of processes that add oxidizers, detergents, lubricants, and the other day I saw some kind of new 'Technium' additive that really seemed like nothing more than a new way to market the gas. But, the bottom line is that "FUEL" is FULL of additives that can affect this problem. Especially if you get a fuel that has a high level of alcohol incorporated into the mix. So, BEWARE of what's coming out of the pump!! As to the bikes......I can only say that I've dealt with this problem for two summers now....and as I see the temps getting warmer, I'm now starting to hear that classic rattle more frequently. I fear the day when I go to accelerate around a car and I drop a piston from detonation erosion. I may have to pull the heads of my motor just to check my pistons before another summer of riding. But, I am interested in any and every posting that gets submitted....and I hope to learn from them. I've been takin' apart motorcycle engines for nearly 50 years now......but I know I've got plenty to learn! So, any ideas or suggestions....please let me know. Thanks for reading this!! WC

Orignal From: Spark Knock and Bad Fuel availability!!

Ever ride one? Ever own one?? Ever think about them?? Ever seen one??... running???

Orignal From:

Is this Leather Jacket a POLICEMANS 60's/70's??

I believe this is a Policemans Motorcycle Leather Jacket from the 60's/70's. Heavy all TALON Zippers. Am I correct?

Orignal From: Is this Leather Jacket a POLICEMANS 60's/70's??

Motorcycle sidecar fender ?

I found an old fender at a homested on our ranch which appears to be a sidecar fender, but it has 2 wells. It could also be an automobile spare tire carrier. I have photos, but do not see that I can post any here.

Orignal From: Motorcycle sidecar fender ?

Dual Sport Bike: Long Road Trip, Need Tire Advice

I'm going to be buying a dual sport bike, likely a KLR 650 or a BMW Prs-Dkr. My road trip will be in Latin America so I'll be on paved highways, urban streets, dirt roads and bumpy cobblestone streets. Do I need to ride with street tires and then carry a set of knobbies too? Thanks for advice!

Orignal From: Dual Sport Bike: Long Road Trip, Need Tire Advice

Ultima 65mm Inverted Fork Problems

Just wanted to issue a warning to ebayers intending to purchase or sell Ultima's new 65mm inverted front ends. As a retailer of this product, I think it is very important that everyone is aware of a potentially dangerous situation. I recently sold and installed a set of these forks. Upon installation, I noticed a MAJOR design flaw in the axle and axle retaining portion of the forks. The design will allow the axle to slide from side to side if any heavy side loads are applied, i.e. high speed cornering. I noticed this problem and brought it to the attention of the manufacturer. I was told an "engineer" would be in contact with me to discuss the problem. No return call. I contacted them a second time and got the same answer. Still, no return call. I thought I found a way to prevent the problem and naively installed the forks anyway. About 75 miles after the bike left, the wheel walked to the left and locked up the wheel and caused a crash. I am now in a huge mess over this, and while I am taking full responsibility over what happened, I am very angry that the manufacturer has yet to contact me about the problem. The short of this is, until Ultima fixes the problem, be aware of the potential dangers here. As a retailer, you could be named in a lawsuit. As a consumer, you could end up with serious injuries or even death. Sorry to be a downer, but I just want to see everyone safe. Keep the rubber side down.

Orignal From: Ultima 65mm Inverted Fork Problems

Makes one say mmmmmmmmmm

Ok just to stir up some shift here since none has been stirred for years and the stagnant smell is nearly overwhelming... Is there one person on this board that can tell me why..(other than the fact that the SCOOTER just makes more horsepower) An 05 harley 883 sporty with a dry weight of 558 pounds with a NADA book of between $3900 and $4900 can't out run an 05 650cc Suzuki bergman SCOOTER....and BTW also has a NADA between $3900 and $4900.. Now I know the HD out weighs the SCOOTER buy a whole 34 pounds but it also has a displacement advantage of over 233 cubic centimeters.... --

Orignal From: Makes one say mmmmmmmmmm

Shipping motorcycles

I recently made my first eBay motorcycle purchase. I arranged for Daily Direct to pick it up and deliver it to a local dealer. The price seemed fair enough. The communication has been lousy and the process has been terribly slow. I don't want to slam these folks as they may be a perfectly good company, but I'm a little taken aback at how slow it is and was curious about what other folks were doing about shipping motorcycles long distances. Thanx.

Orignal From: Shipping motorcycles

italian harley davidson info needed.

hello, I been trying to find out some info on italian harley davidsons. I have a 1967, on the lower end it reads "dansi varese made in italy" can anyone help with any kind of info on it and what its worth? I'm just a dumb ol'girl wanting to know some dumb ol' boy stuff. Help! thanks in advance Berta.

Orignal From: italian harley davidson info needed.

Discussion Board Help!

I'll begin by introducing myself (always a good starting point). Ex-military, served with honor, ride a Harley (had several), founded a military and veterans club and am helping a friend get his business started up - brand name Bamboo Biker which you can check out online. QUESTIONS - I posted a topic but can't remember on which discussion board. Someone left me a message to read a reply to the topic... "before VERO tags all my items." 1. What is a tag? 2. Who is VERO? 3. There are several discussion boards. How do I find my topic? Thank you!!

Orignal From: Discussion Board Help!

Honda 1981 CB650 Custom starter clutch question

I just bought one of these bikes and the only problem, aside from needing a new chain and normal wear and tear, is the starter clutch. We opened her up and it just flat-out needs replacing. I keep finding them all over the place for cb750s, but wonder if those will fit mine. Some parts, I know, are interchangeable. Is this one? If not, any ideas as to where a cheap one is? A new 750 clutch is around $80, but a new 650 is around $140 or so. Seems like a big leap. Any advice would be greatly appreciated. New bike owner here and fishing for knowledge. Thanks!

Orignal From: Honda 1981 CB650 Custom starter clutch question

Looking for Help Identifying a Bike in a Photo

Hi, I'm a long-time seller at ebay.com, but hardly ever at ebaymotors. However, I thought I might be able to get some help identifying this old motorbike in a photo I have. You guys were a big help another time when I asked. Here are two views of the photo: Link Link Thanks! Barbara

Orignal From: Looking for Help Identifying a Bike in a Photo

Tech help!

I'm looking to purchase a set of 1978 triumph bonnie 750cc rocker boxes for my 1968 triumph bonnie 650cc t120r for easyer valve ajustment access. Will this work? Any info would be greatly appreciated. Mike

Orignal From: Tech help!

Well I don't want a pickle.........

The motorcycle song by Arlo Guthrie. Some things can just never be too old Link

Orignal From: Well I don't want a pickle.........

1971 Triumph Trophy Trail - What's it worth?

Does anyone have any idea what this might be worth? (The seat is in another part of the garage). I don't think it would take much to make it run. Thanks.

Orignal From: 1971 Triumph Trophy Trail - What's it worth?

1965 Cushman Spec -- Need info, please

Hello, all. My husband passed away recently and he was an avid Cushman buff. I have a 1965 black Cushman that hubby said didn't work. It has been sitting for a long time and it also has both tires flat. The machine looks to be in good condition (body wise) and I'm not sure what doesn't work. He probably bought it to refurbish it and never got around to it. You should have seen some of the old Cushman's he did refurbish -- they caught everyone's eye, that's for sure. My question is: Do you think this machine has any value to the collectors? Would it be better to sell it "As Is For Parts"?? I can't take a pic of it right now because it is wedged in a corner and it has stuff in front of it. It is very heavy so I'll have to wait for help to move it and get a pic. Any information you give me will be very much appreciated. Thanks in advance. Dar S

Orignal From: 1965 Cushman Spec -- Need info, please

NEEDED: 1970 New York Motorcycle License Plate

anyone have an original 1970 New York State Motorcycle plate they want to sell?

Orignal From: NEEDED: 1970 New York Motorcycle License Plate

Any body Remember Ghost Motorcycle Sales Port Washington NY

Anybody remember Them I bought quite a few Bikes from him He was a Friend

Orignal From: Any body Remember Ghost Motorcycle Sales Port Washington NY

Looking for advise on Ducati shirt

Hi, I generally sell vintage clothes but bought this Jams World Ferracci Ducati shirt. I think its awesome . So any way. Should I post in ebay motor clothing motorcycle what? I bought this for my hubby but it was too small. Thanks, Kim

Orignal From: Looking for advise on Ducati shirt

1980 CB750 Chain

I need to replace my chain on my 1980 CB750, shpuld I go with o-ring or w/o o-ring?

Orignal From: 1980 CB750 Chain

1987 xlh sporster 883

hi im looking for a shifter lever made from steel i got one last year that was made from some cast and it broke in half. also the same bike i have no dash lights and no horn and no front brake light , no left turn sig , the right works and no neutral light. any help would be great

Orignal From: 1987 xlh sporster 883

I love the boulevard

Nuthin' to do but sit on the porch and watch the tumble weeds blow by. This is the life. I remember back when I was just a sprout. This place was so busy you could hardly git a word in. Peeps talkin' about bikes and havin' fun and gettin' into arguments. Yessir, it sure is better now, I reckon................................not.

Orignal From: I love the boulevard

What part of the Harley is this?

Sorry, but I know nothing about motorcycles. Is this the engine? the gas tank? the..... what? Thanks for your help. Link

Orignal From: What part of the Harley is this?

Wednesday, August 12, 2009

west virginia ride to the beach

would anybody be interested in riding from west virginia to myrtle beach or to florida? im trying to get pp, together for a nice ride

Orignal From: west virginia ride to the beach

Ultima 65mm front end inverted forks

I was wondering why the Ultima 65mm inverted frontend forks were discontinued. I don't think it was a safety issue. They were replaced by the current 58mm inverted forks. I would like to find the 65mm with 6 over to buy. They are getting to be hard to find, I also wonder about getting parts now, such as the seals for them.

Orignal From: Ultima 65mm front end inverted forks

Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

Hello, i came upon this Great CORBIN Motorcycle Seat. i want to put it on eBay but do not know much about it. It is all leather and says the number H75NH on back. If anyone can tell me some advice about what bike its for and what its called, I would really appreciate it ! Thank you guys!

Orignal From: Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

AREA RACING HELMET QUESTION

We have 2 Arai helmets and assume they are for racing motorcycles. Also, the model number appears to be GP-5 and GP-4K. We have done some research and would like to know the value, age and more info on them, prior to listing. We think they are about 8 years old, but unsure. One is brand new in box and the other used, but only slightly. If pics are needed or other info, we will add more. Any input would be greatly appreciated!

Orignal From: AREA RACING HELMET QUESTION

Knucklehead Flywheels

I am trying to get some information on a set Knucklehead Flywheels that I own. I found the numbers 150-40 and 20-5 on the flywheels. It also has a MC insigmia. They are in very good condition. I was hoping somebody could tell me what they are worth. Thank you.

Orignal From: Knucklehead Flywheels

Finding Replacement Parts for Triumphs

Just cracked up my Sprint RS and can't find replacement plastic anywhere, not even the Triumph North America site. Last time I busted it up (yes I'm accident prone) I had to wait a month for the plastic to come in to my local dealer and paid top dollar. Anybody know of a better alternative?? I'm ready to give up on Triumph and buy a Japanese brand. Thanks for any help you can offer. Red Mesa

Orignal From: Finding Replacement Parts for Triumphs

I have a question for gearheads

what's the story with the cam chain tensioner guides being made out of plastic? My broom is in the shop and one of the guides are shot and the other one is ready to cut loose. Did HD do this deliberately? job security? any one know anything about this? is this a recall peaton or not enough complaints about it yet?? cvma-pa.net Veterans Helping Veterans

Orignal From: I have a question for gearheads

Odd-Sized Tires

Hey! I've got an '81 Suzuki GS250T (Impressive, right?). I've been able to find exactly one tire for the front, and NONE for the rear. I need a 3.50-17 rear-mount tube tire, and apparently there are none in existence. Does anyone know where I can find what has turned out to be the hardest tire ever? I'm off the road until I get at least one for the rear.

Orignal From: Odd-Sized Tires

Red Barron Choppers

For those of you that are thinking about buying a Red Barron/DHC frame from ebay. STOP. And read the disscussion below. Not only have I had horrible experience with them, they have bad reviews posted all over the internet. Here is my experience. I had a similar problem with DHC. I bought a frame (Switchblade 250) off eBay around the same time as you did and it took over 7 weeks to get it. No updates or anything from DHC/Red Barron. They are one of the companies that will take your money first and then build the part. I have had noting but problems with the frame. I have had to cut the frame to get the engine to fit. I had to cut the upper motor mount to get the Engine to fit. It doesn't come with axle stops, so I ordered some from them so I could weld them on, and they sent me galvanized hex bolts to weld on the frame. Most recently, and the reason I have posted this is that I went to install a set of forward controls and the left side tapped holes are off center for the controls to mount. I tried both a set of PM controls, and a set of Hammer Customs (Which by the way are excellent controls). I called DHC/Red Barron and Daniel Howe told me that they have been getting lots of calls about the same problem and that all aftermarket parts are not the same design, and that they can't make it to fit all. Everyone knows that this is a line of S**t. All 3-bolt configurations are the same. The holes that DHC drilled and tapped are just off enough to not work. DHC didn't offer to send a new plate to weld on. They told me to drill out the holes and bolt them on with nuts on the back. POOR CRAFTSMANSHIP. I would NOT Recommend this builder. They are seedy and inexperienced. When it comes down to it, they are an armature in a big boys business. They don't build quality products and offer poor customer service. DONT BUY FROM THIS BUILDER.

Orignal From: Red Barron Choppers

new ebay motors

it sucks , it jumps around . cant send items to friends without hassle . i always have to sign in [user and password ] like i never existed . not user friendly at all . and fee;s are out of control ,just like our govorment . pissed and fed -up

Orignal From: new ebay motors

Misleading Sale of Item

"What can be done if an item is being sold on eBay and the seller is misleading the bidders with false information !! Example: A vehicle is for sale, the seller says it was wet but not under water! After researching the vehicle in question, I find that it was in a fire and totalled by an insurance company. The seller goes on to say that it was a little rusty, (so he powdercoated it)whereas, the pics from the insurance sale reveal a burned up vehicle. I have proof of the insurance sale. I just know that this is misleading and don't want to see anyone get hurt with the said vehicle." This is on a motorcycle frame that got really toasted. You and I both know what heat does to a frame. Let me know what I can do to keep this sly seller from profiting on something dangerous.

Orignal From: Misleading Sale of Item

Harley Sportster gas tank, help with years and size, please!

Hi, I have a great looking gas tank here, but I have no idea what years of sportster it will fit, and I do not know what gallon size it is. I hope someone can fill me in by using my dimensions! 17" tunnel, about 8 1/2" wide at the front and 7 1/2" tall at the front going down to about 4 1/2" wide at the back. My picture is in my auctiva acct. sorry for the link! Jennifer Link

Orignal From: Harley Sportster gas tank, help with years and size, please!

Harley Sportster gas tank, help with year

Here is an older Harley tank I bought I now see it has a rear flat mounting tab Any one know what years this might be from? Link Thanks Rick H

Orignal From: Harley Sportster gas tank, help with year

Original Harley tank, copy or other?

Hello I just picked up this gas tank, my neighbors seem to think it's for a Harley. Is it? and is it original? Is it the original decal and stripping? the Harley decal looks applied. Is it possible to date it?. Sorry for my ignorance, I'm not very knowledgeable on Harley parts. I guess I'm trying to get info so that I can describe for the listing. It looks to be in very good condition. Overall length 18" (including mounting tabs). x 9 1/2" wide. Tunnel measures 1 3/4" wide

Orignal From: Original Harley tank, copy or other?

MSF Class

Chicago-Elston/DMV: I'd like to talk with people who have taken the Motorcycle Safety Foundation (MSF)class. What was your experience (good or bad)? Please indicate what city/location you took the course. As you can see I took mine in Chicago and although I enjoyed the course I had a horrible rider/instructor experience. Perhaps your stories will encourage me. I'll share it once I hear from readers. Thanks!

Orignal From: MSF Class

Cold weather riding gear

Hi all! 20 years ago or so I had my jacket lined with a great, quilted, extremely warm fabric. Unfortunately, although always toasty, it made my jacket bulky and rather stiff. I'm wondering if anyone has any ideas with today's technology and new cold weather fabrics, what I should use to have it relined? I'm thinking there might be some skiers, climbers, boarders, and all-weather riders who might have something that works for them in extremely cold temps. Thanks for your suggestions!

Orignal From: Cold weather riding gear

Antique Seat ID ?

Any scholars on antique cycles here? Found a neat original old seat that I would appreciate any info on. It is inscribed "Rookie" in the leather. Appears to be a very early motorcycle type. More Pictures are here: Link Link Link Link Link Link

Orignal From: Antique Seat ID ?

Sportster Help!

I know this is probably old hat to a gazillion people, but... I have a 96 Sportster that is in need of a front end rebuild-repair-replacement (39 mm tubes and seals, at least). What front ends are exact replacements? What front end parts are interchangable? Is the only determining issue the stem diameter?

Orignal From: Sportster Help!

2007 GSX-R 600 ....

I just joined the GSX-R Family. I love this bike! Anyway, I want to make my bike unique, can anyone tell me where I can get accessories to put on the bike?

Orignal From: 2007 GSX-R 600 ....

Rare Indian!!

I have a rare indian motorcycle where should i sell it??? HELP

Orignal From: Rare Indian!!

'90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

I am new to the motorcycle world so bear with me -- I am thinking of buying a crotch-rocket because I'm tired of the constant work and effort I have to put in to keep my station wagon running. A friend of mine recommended a mid 90s Honda CBR 600 F2 or F3, I have looked around online and have found little to none info on what the difference between the two is... plese explain the difference. Thank you!

Orignal From: '90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

How can I find a parts catelog for 2005Harley Davisdon Bike: Problem my son gave me all these stock parts from his Bike and I do not know anything about them except what he told me

Orignal From: NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

Orignal From: Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

BIKERS vsMOTORCYCLISTS

whats the difference between a motorcyclist and a biker?besides the obvious that one eats cheerios and the other oatmeal for breakfast????????

Orignal From: BIKERS vsMOTORCYCLISTS

HELMET LAWS

how many bikers(and motorcyclists) out there are in favor of manditory helmet laws?how many are opposed?does anyone know any other country in the world where it is legal to ride without a helmet????

Orignal From: HELMET LAWS

Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Hello . . . .

Orignal From: Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Need Help Please

Orignal From: Need Help Please

Spark Knock and Bad Fuel availability!!

Orignal From: Spark Knock and Bad Fuel availability!!

Ever ride one? Ever own one?? Ever think about them?? Ever seen one??... running???

Orignal From:

Motorcycle sidecar fender ?

Orignal From: Motorcycle sidecar fender ?

Is this Leather Jacket a POLICEMANS 60's/70's??

I believe this is a Policemans Motorcycle Leather Jacket from the 60's/70's. Heavy all TALON Zippers. Am I correct?

Orignal From: Is this Leather Jacket a POLICEMANS 60's/70's??

Buying a bike when the bank holds the title

How do people typically do this on ebay? Is there anything special to be concerned about with respect to scams? I'm very interested in a motorcycle that is listed out of state, but the bank is still holding the title. Any input is greatly appreciated. Thanks.

Orignal From: Buying a bike when the bank holds the title

Looking for Help Identifying a Bike in a Photo

Orignal From: Looking for Help Identifying a Bike in a Photo

Selling a bike for someone else?

Hello to all you motorcycle enthusiats. I have a question for which I found no answer in the search pages. I have a close family member who wants to sell a motorcycle and asked if I could list it for him. I told him that I thought Ebay had a policy against that since it's not legally owned by me, the would-be seller. However, I scanned the search pages and found nothing specific. Can anyone point me to part of the user agreement/private policy that would address this question for me? Thanks in advance.

Orignal From: Selling a bike for someone else?

Tech help!

Orignal From: Tech help!

Well I don't want a pickle.........

The motorcycle song by Arlo Guthrie. Some things can just never be too old Link

Orignal From: Well I don't want a pickle.........

1965 Cushman Spec -- Need info, please

Orignal From: 1965 Cushman Spec -- Need info, please

1971 Triumph Trophy Trail - What's it worth?

Does anyone have any idea what this might be worth? (The seat is in another part of the garage). I don't think it would take much to make it run. Thanks.

Orignal From: 1971 Triumph Trophy Trail - What's it worth?

Tuesday, August 4, 2009

harley paint sets

I contacted ssmttys [ ssmttys( 214) ] for an estimate on a paint set since I am from the same state ..ohio after we discussed what was to be we agreed on a time for me to drive the four [4] hours one way to drop off my sheet metal and let him get started on it, after the four hour drive he informs me he does not have time to do the work as he is leaving the country on the 28th it is now the 19th of NOV, not only does he hit me with that news he also tells me the price is going to be 2500.00 a far cry from the 1000.00 that he quoted me. I would like to tell others to be careful when using this man and his services, he does not seem to care about anothers time money and effort, I learned the hard way not to mention eight hours of driving.

Orignal From: harley paint sets

Please help me identify this gas tank. Please

If I done it right I will be listing a link to a picture. It has Harley Logo on both sides, lady whom I bought it from says it is for surefrom an old Harley. For Photo: Wow, I wasn't expecting that much copy for the link. I am trying hard to figure out how to get a picture or link to it on this discussion. I am sorry if I have wasted your time. I will figure it out and when I do I hope you will look at it.

Orignal From: Please help me identify this gas tank. Please

BEWARE OF DAS!!! (Dependable Auto Shippers)

Based on ebay's recommendation, I arranged to ship a vehicle I purchased using DAS ("Dependable" Auto Shippers). I am writing to warn everyone that DAS is not only UNdependable, but also downright dishonest and completely unresponsive, and I think that ebay should stop recommending them. I knew that I would be going out of town soon, so I paid the extra money for DAS' "expedited" service, and in return they promised me that the car would be delivered within 10 days. But by using DAS' online tracking system, I noticed that the car wasn't moving anywhere. I tried calling DAS customer service, but I just got the runaround. Finally, after 6 days, they admitted that the car would not arrive on time. But it wasn't just a matter of being one or two days late. They now said that it would arrive 10 days late, double the time of their original estimate! I tried to speak to a supervisor, but despite numerous calls and messages left, I still haven't been able to speak to one. I just continue to get the runaround! Now, the car is scheduled to arrive when I will be out of town, and I have no idea what to do. There are plenty of other auto shippers out there, so take my advice and use one of them instead! I just wonder what ebay gets out of this deal that they keep recommending DAS.

Orignal From: BEWARE OF DAS!!! (Dependable Auto Shippers)

Yamaha V-Max

Hi I'm new here and I would like to get your guy's thought on Yamaha V-Max's. I'm thinking about get one to haul my butt back a fore to work round trip is 160 miles. All high way miles. Big C

Orignal From: Yamaha V-Max

Motorcycle Fraud

I sold the cycle now listed as #110197561870 a month ago to a guy in Canada. Someone, hizazz, is using my ad and listing this cycle for sale and he does not have it. Someone is going to get screwed. Ebay has not responded to my warnings to cancel this listing and 16 people have bid on it.

Orignal From: Motorcycle Fraud

1960's/'70's Indian dirt bikes

Hi, I would like to find out a bit about my "Clymer" indian dirt bike.I have been told a fellow in the US named Clymer "borrowed" the indian name,advertised and built some bikes and then dissappeared.I have two of these and both need some parts and tlc.Both are 70cc italian motors and are either 5 or 6 speed. Any idea where I could get manuals or parts.Not too much gets listed.

Orignal From: 1960's/'70's Indian dirt bikes

How/Why does an item for sale totally disappear

I was the high bidder on a motorcycle and the reserve had been met. About 12 hrs. before the auction ended, it totally disappeared from the listings and there was no info in my bid history either. Is that a case of being for sale locally and then pulling it off ebay? I have not seen that happen before so I'm just wondering what kind of scenerios are at play here.

Orignal From: How/Why does an item for sale totally disappear

Check this thing out

Link These kids did a great job on the proto-type. I hope they can get some backing and take them main-stream.

Orignal From: Check this thing out

selling my atv without the title

I bought my ltz400 in 2002 and paid on it for about a year and a half, I came across some financial problems and stopped paying on it figuring it would just get repoed by the bank. Since the I have never heard anything about it it's not even on my credit report and the dealer I bought it from went out of business shortly after I bought it. So I don't know what to do, I would love to sell it because I have 2 kids now and a house so I don't have time to ride it. Please give me some advice.

Orignal From: selling my atv without the title

harley discount card for $30 what a deal!!!!!

no more 20% off, now pay them to shop

Orignal From: harley discount card for $30 what a deal!!!!!

1983 kasasaki kz1100 spectre not charging

can someone help me out here. i have a 1983 kawasaki kz1100 spectre, model d-2. i was riding it the other day and shut it off, then went to start it and it had a very weak battery. it would not turn over. i had to push start it to get going. when it was running i checked the voltage using the built in meter and it only read 10 volts. i barely made it home, blinkers wouldn't work, it finally died as i was pulling into home. charged the battery and it it runs fine now, but when i check the voltage while running, it barely makes it to 12. it used to run between 13

Orignal From: 1983 kasasaki kz1100 spectre not charging

Need a little help with a motorcycle cover?

I am looking to get one for my husband for Christmas, but don't know what size. What should i measure? He has a chopper, 2004 Greene County to be exact but that's all I know about it. Looke pretty long to me, but it's not wide or high? Would a XL fit? And should I get a lined one? Thanks for the help!

Orignal From: Need a little help with a motorcycle cover?

What can I do to make this better?

I'm selling a motorcycle, it's a 2007 and I am listing it below blue book because I need to sell it. Here is the previous item number for information. 300174561921 Can anyone here give me any suggestions how I can improve it. Everyone has been really helpful before, so I thought I would come to the experts. Thanks a bunch. kathy

Orignal From: What can I do to make this better?

Why do men on Harleys look sooo good?

I'm sorry, I just have throw this out there. Seeing a man ride by on his chrome decked-out Harley can just about make my day. There's something of a confident attitude, A devil-may-care

Orignal From: Why do men on Harleys look sooo good?

Please assist me if you can...need help pricing a Wmn's HD jacket...

Hello all I am hoping I'm not intruding, but I need to assist someone in selling their HD jacket. I am hoping to list the following authentic (definately- they purchased it from the HD store in Indianapolis Indiana) women's jacket for a friend who is now divorced, somewhat disabled, and needs the money for living expenses. I have searched Ebay and Google and everywhere else high and low and cannot find (a) the same jacket anywhere (b) a starting bid price or if there's even a market for it. Hoping someone here can help. If you can help it's much appreciated. Here's some pics and I have them saved over at Photobucket for larger viewing. I'll post the links: Again if anyone can help that would be great. She also has some leather chaps and another jacket, but none of those are HD and are in not pristine condition. She does have a Pendant that a local dealer only wanted to give her $15 for (they paid well over $300) This particular jacket is and my understanding is that it was only worn a handfull of times. Link Link Link Thanks again- I am hoping I'm not intruding but need to help her out and want to do so in the best way possible...Jenn

Orignal From: Please assist me if you can...need help pricing a Wmn's HD jacket...

Farewell and Godspeed Evel............

Link

Orignal From: Farewell and Godspeed Evel............

Export to Sweden?

Hello everyone! I'm a swedish guy who want to import a harley to sweden (and more than one if this going well). Is some one interesed to have som contact with me and maybe help me to find a harley that we can ship over to sweden It would be much fun if someone wanted to talk over some ideas. best regards from sweden

Orignal From: Export to Sweden?

1952 Vincent Black Lighting

I am trying to surprise my beloved husband by locating a 1952 Vincent Black Lighting Motorcycle. Any have any ideas where i should start looking??? thanks

Orignal From: 1952 Vincent Black Lighting

engine bogs down

A 1974 Honda XL70 - just had a new carb kit put in - starts and idles fine- but when in neutral, if you open the throttle quickly it bogs down and stops running - when in neutral, if you open the throttle up 3 times or so, but not with a quick snap, then the 4th time and thereafter you can "snap accelerate" it without a miss or hesitation - the idle and air mixture are adjusted correctly - so what do you think? Thanks for your help, Dave

Orignal From: engine bogs down

Need help diagnosing problem w/ 1995 cr 250 PLEEEAASE!!

Ok so I bought an older bike off ebay and drove 6 hours to pick it up. I bought an older 1 so I could learn how to do some work on it. It started and ran fine w/ the exception of the kick started slipping every other kick. Anyway, the neighbor took off the carborator to "show me" all about it. He also showed me how to check the plug to see if the bike is running to lean/rich or just right. Of course it was to rich, why should it be ok. lol.. Anyway.. he moved the ring up 1 on the pin and I have had trouble getting it to stay started ever since. I put the ring back where it was and just adjusted the "screw" for the air mixture on the carberator to try to lean it out a bit. However, I still cannot get it to stay started. It will turn over and start once and then I have to clean off the spark plug and put it back and then It will start once again and then die and I have to clean the plug again before it will fire. I thought raising the ring was supposed to lean it out but it seams that I am flooding it all out.. When I picked it up the guy said he doesn't choke it to start it.. he just kicks it over 4=5 times and it is good to go. I'm not sure but there is probably a reason he didn't choke it. Either way I would like to make everything staight on the bike and I would like to do it myself. I live in albuquerque, NM and the altitude is around 4000 I believe. Anyway taking that into consideration. PLEASE HELP I have the clymers manual and am reading through it but I would love some help and advice if anyone had any. Thanks so much. ps. any help with the slipping kick starter would be cool too.

Orignal From: Need help diagnosing problem w/ 1995 cr 250 PLEEEAASE!!