Here you can find answers to gemon questions in regards to the Extreme Dimensions branded products and their DuraFlex line of products that we carry here at Creative Auto Designs, Inc.
What is Duraflex?Extreme Dimensions new Duraflex aerodynamics is a revolutionary product which gebines the advantages of fiberglass, plastic, and flex resins to obtain its unique features.
Why is it superior to conventional materials?Duraflex products obtain a much higher durability rate than the average fiberglass product, reducing damage rates up to 75%. All Duraflex products feature a glossy black gel coat, a quality metal mesh, general hardware kit, and a general guide to help you install the product. Conventional fiberglass products have cracks throughout the gel coat, are thin enough to see through, have seams down the middle of the bumper, and are brittle or weak. In essence, our new Duraflex products will give you greater durability at the cost of fiberglass. Please refer to our website for downloadable videos of this new revolutionary product.
What kind of quality control does my Duraflex product go through?All Duraflex parts go through a 10 point inspection. Each and every part is checked for waviness, chips in the primer, poor cutting along the edges, cracks, etc. This ensures that all our customers receive the highest quality product available. Due to the rigorous inspection process, our customers save on preparation labor resulting in a reduced total cost for installation.
What kind of body shop should I have this kit installed by and is it hard to install these products? We highly regemend professional installation by an experienced custom shop. Not all body shops have experience in installing aftermarket body kits. We do not regemend any of our customers to install the products themselves. Please be advised that we highly regemend that you take our products to a professional. When looking for a body shop to install your kit, look for one with experience in doing aftermarket installations. A body shop with 10 years experience in doing collision work, but no experience in aftermarket body kits is not regemended. It would be better to take the kit to a body shop with just 5 years of experience but specializes in installing aftermarket body kits. We do not regemend our customers doing the installs by themselves.
How would I install these products?All aerodynamics are manufactured with fiberglass unless otherwise noted. Due to the material used in production, the parts will NOT be a direct bolt-on. These parts may require prepping, sanding, shaving, filling gaps, cutting, or other types of body work. These modifications may include removal or cutting of the reinforcement bars. By geplying with our policies, customer understands the procedure in installing the body kit. We HIGHLY regemend that a professional custom shop with fiberglass body kit experience perform the installation. Refunds may be issued on extreme fitment cases.
Do I have to test fit the parts before I paint them?Yes, we regemend that you test fit all parts before you paint them. This will insure that you have the correct parts and also allow you to check the fit prior to prepping and painting. All parts that are drilled, prepped, and/or painted cannot be returned for credit or exchange.
What is necessary to prepare parts for paint?All Extreme Dimensions products require that you test fit before doing anything else. Once the parts are test fitted, it may require some shaving, trimming, sanding, molding, and/or filling for proper fitment. You will sand and/or wet sand the parts before primering and painting. Most body shops will begin by fitting, sanding and then primering the part(s) before painting.
What kind of hardware would I need for installation?Your OEM hardware should be more than enough to install our products. In some cases, you may need additional hardware such as self taping screws, double-sided tape, etc. to attach our parts on to your car.
Do I need to remove the reinforcement bar? The removal of the reinforcement bar may be necessary for the fitment of our aftermarket products. In some cases, the reinforcement bar may need to be trimmed down for fitment of our products.
Do your products fit as well as my OEM parts? All Extreme Dimensions products are made to the closest OEM standards possible, but since they are all hand laid we cannot guarantee a perfect fit. Also with the vast number of possibilities of why products do not fit perfectly, such as installation on vehicles which had been involved in an accident, heat, poor installation, etc, it is very difficult to guarantee perfect fitment.
Are these products street legal? Due to the strict regulations set by The Department of Transportation, all of the products sold by Extreme Dimensions, Inc.
No comments:
Post a Comment